¡¡¡¡Local media used for conducting oil, the requirements for forming a high temperature of the plastic mold pieces of high-precision production and the production of plastic pieces can be satisfied with the results apply to both plastic blown film, and so on need to control the temperature.
Features:
1, small size and easy to operate, can significantly increase productivity;
2, heating up to 140 degrees, the temperature in the precision of ¡À 1%;
3, bending to overcome depression, such as fusion crack pattern defects;
4, the product can improve the shape of the luster, quality and stability.
Model |
MKR-1 |
MKR-2 |
MKR-3 |
MKR-4 |
MKR-5 |
MKR-6 |
Temperature range¡æ |
45¡æ¡«160¡æ(45¡«250¡æ) |
Temperature method |
Japan RKC |
Power Supplyv |
P.I.D.µ÷½Ú |
| Cooling |
380V 50Hz |
| Medium heat |
Indirect cooling |
| Heating power kW |
0.75 |
0.75 |
0.75 |
1.5 |
1.5 |
2 |
| Pump flow L/min |
3 |
6 |
9 |
12 |
20 |
32 |
Electrical powerkW |
30 |
30 |
60 |
100 |
140 |
200 |
Pump pressure Pa |
2 |
2 |
2.5 |
3 |
3 |
40 |
Cooling water piping |
1/2 |
1/2 |
1/2 |
1/2 |
1/2 |
1/2 |
Circulating water piping |
1/2 |
3/4 |
3/4 |
1 |
1 |
11/4 |
| Size(mm) |
700
¡Á310¡Á640 |
700
¡Á310¡Á640 |
770
¡Á350¡Á700 |
800
¡Á350¡Á800 |
1100
¡Á600¡Á1300 |
1300
¡Á600¡Á1300 |
| Weightkg |
45 |
60 |
70 |
90 |
110 |
120 |
